Festo NEBU-M8G3-E-5-LE3 Connecting cable 569843

• Conforms to standardWire colors and connection numbers as per EN 60947-5-2 EN 61076-2-104

• Explosion prevention and protectionObserve the information on the certificate Zone 2 (ATEX) Zone 22 (ATEX)

• Cable designationWith 2x label holders

• Product weight123 g

• Electrical connection 1, functionField device end

• Electrical connection 1, designRound

• Electrical connection 1, connection typeSocket

• Electrical connection 1, cable outletStraight

• Electrical connection 1, connection technologyM8x1 A-coded as per EN 61076-2-104

• Electrical connection 1, number of pins/wires3

• Electrical connection 1, occupied pins/wires3

• Electrical connection 1, type of mountingScrew-type lock

• Electrical connection for input 1, connection pattern00991871

• Electrical connection 2, functionControl side

• Electrical connection 2, connection typeCable

• Electrical connection 2, connection technologyOpen end

• Electrical connection 2, number of pins/wires3

• Electrical connection 2, occupied pins/wires3

• DC operating voltage range0 V ... 60 V

• Operating voltage range AC0 V ... 60 V

• Current rating at 40°C3 A

• Surge resistance1.5 kV

• Cable length5 m

• Cable characteristicSuitable for energy chains

• Connector cable test conditionsFlexural strength: as per Festo standard Test conditions on request Cable chain: 5 million cycles, bending radius 28 mm

• Bending radius, fixed cable installation12 mm

• Bending radius, flexible cable installation39 mm

• Cable diameter3.8 mm

• Cable diameter tolerance± 0.1 mm

• Cable design3 x 0.25 mm²

• Nominal conductor cross section0.25 mm²

• Degree of protectionIP65 IP68 IP69K

• Note on degree of protectionIn mounted state

• Special featuresOil-resistant

• Ambient temperature-25 °C ... 80 °C

• Ambient temperature with flexible cable installation-5 °C ... 80 °C

• CE marking (see declaration of conformity)As per EU low voltage directive As per EU RoHS directive

• UKCA marking (see declaration of conformity)To UK instructions for electrical equipment To UK RoHS instructions

• LABS (PWIS) conformityVDMA24364-B2-L

• Note on materialsRoHS-compliant Halogen-free Free of phosphoric acid ester

• Contamination level3

• Corrosion resistance class (CRC)2 - Moderate corrosion stress

• Material of cable sheathTPE-U(PUR)

• Color cable sheathGray

• Housing materialTPE-U(PUR)

• Housing colourBlack

• Material of screw-type lockBrass, nickel-plated

• Seals materialNBR

• Material of pin contactsCopper alloy, gold-plated

• Insulating sheath materialPP

Any questions, feel free to contact us

jeff@hkxytech.com   jeff@whxyauto.com   +86-15072331761