Festo EMMT-AS-100-M-HS-RS 5255530 Servo Motor
• Ambient temperature-15 °C ... 40 °C
• Note on ambient temperatureUp to 80 °C with derating of -1.5% per degree Celsius
• Max. installation height4000 m
• Information on max. installation heightwith 1,000 m and longer only with derating of -1.0% per 100 m
• Storage temperature-20 °C ... 70 °C
• Relative air humidity0 - 90 %
• Conforms to standardIEC 60034
• Thermal class according to EN 60034-1F
• Max. winding temperature155 °C
• Rating class according to EN 60034-1S1
• Temperature monitoringDigital motor temperature transmission via EnDat® 2.2
• Motor type as per EN 60034-7IM B5 IM V1 IM V3
• Mounting positionAny
• Degree of protectionIP40
• Note on degree of protectionIP40 for motor shaft without rotary shaft seal IP65 for motor shaft with rotary shaft seal IP67 for motor housing, incl. connection technology
• Concentricity, coaxiality, axial runout according to DIN SPEC 42955N
• Balancing qualityG 2.5
• Detent torque< 1.0% of peak torque
• Storage lifetime, under nominal conditions20000 h
• Interface code, motor out100A
• Electrical connection 1, connection typeHybrid plug
• Electrical connection 1, connection technologyM23x1
• Electrical connection 1, number of pins/wires15
• Electrical connection for input 1, connection pattern00995913
• Contamination level2
• Note on materialsRoHS-compliant
• Corrosion resistance class (CRC)0 - No corrosion stress
• LABS (PWIS) conformityVDMA24364 zone III
• Vibration resistanceTransport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Shock resistanceShock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• CertificationRCM compliance mark c UL us - Recognized (OL)
• CE marking (see declaration of conformity)As per EU EMC directive As per EU low voltage directive As per EU RoHS directive
• UKCA marking (see declaration of conformity)To UK instructions for EMC To UK instructions for electrical equipment To UK RoHS instructions
• Certificate issuing authorityUL E342973
• Nominal operating voltage DC680 V
• Type of winding switchStar inside
• Number of pole pairs5
• Stall torque8.6 Nm
• Nominal torque6.3 Nm
• Peak torque22.4 Nm
• Nominal rotary speed2700 1/min
• Max. rotational speed4790 1/min
• Max. mechanical speed13000 1/min
• Motor nominal power1770 W
• Continuous stall current5.9 A
• Motor nominal current4.3 A
• Peak current22.1 A
• Motor constants1.46 Nm/A
• Standstill torque constant1.66 Nm/A
• Voltage constant, phase-to-phase100 mVmin
• Phase-phase winding resistance1.84 Ohm
• Winding inductance phase-phase20.4 mH
• Winding longitudinal inductivity Ld (phase)10.2 mH
• Cross inductivity Lq (phase)15.3 mH
• Electric time constant16.6 ms
• Thermal time constant73 min
• Thermal resistance0.5 K/W
• Measuring flange300 x 300 x 20 mm, steel
• Total output inertia moment4.46 kgcm²
• Product weight7100 g
• Permissible axial shaft load200 N
• Permissible radial shaft load1110 N
• Rotor position sensorAbsolute encoder, single-turn
• Rotor position sensor for manufacturer designationECI 1319
• Rotor position encoder for absolutely detectable revolutions1
• Rotor position sensor interfaceEnDat® 22
• Rotor position sensor measuring principleInductive
• Rotor position encoder for DC operating voltage5 V
• Rotor position encoder for DC operating voltage range3.6 V ... 14 V
• Rotor position encoder for positional values per revolution524288
• Rotor position sensor resolution19 bit
• Rotor position encoder system accuracy angle measurement-65 arcsec ... 65 arcsec
• MTTF, subcomponent190 years, rotor position sensor
• Energy efficiencyENEFF (CN) / Class 2
Similar model numbers:
EMMT-AS-100-S-HS-RMB
EMMT-AS-100-M-HS-RMB
EMMT-AS-100-L-HS-RMB
EMMT-AS-100-S-HS-RM
EMMT-AS-100-M-HS-RM
EMMT-AS-100-L-HS-RM
EMMT-AS-100-S-HS-RSB
EMMT-AS-100-M-HS-RSB
EMMT-AS-100-L-HS-RSB
EMMT-AS-100-S-HS-RS
EMMT-AS-100-M-HS-RS
EMMT-AS-100-L-HS-RS
Any questions, feel free to contact us
jeff@hkxytech.com jeff@whxyauto.com +86-15072331761
